Printed a draft orange, a high def orange on a printbot simple, and the white model is printed on a uPrint SE.
Pictures below illustrate the process from filament to real life utilization.
This project was done at TechShop.
Sunday, March 20, 2016
Subscribe to:
Posts (Atom)
-
Check here how to flash the rom https://wiki.mrchromebox.tech/Firmware_Write_Protect Check here to see if you should use Legacy or UEFI ROM ... -
I have a K360 Bluetooth keyboard, a M557, M720 Bluetooth mice and M325 mouse. I've been using these for years with Ubuntu, from 16.04 to... -
How to run windows with acceleration support on Ubuntu This works on ubuntu from 22.04 to 23.10. This setup will accelerate the virt...